Current Process for Handling RFC Errata Reports

1.1. Background on RFC Errata

The RFC Production Center (RPC) began to collect and post RFC errata in 2000. The idea was to discourage readers from repeatedly pointing out the same typos in published RFCs. This evolved into an errata verification and posting process that was a manually operated, email-based task. Errata from this period have been made available in the current system and marked as Reported or Verified, as appropriate. Generally, the name of the verifier is not given as this information was not associated with errata records until the new system was put in place.¶

Because the number of errors reported turned out to be significantly greater than anticipated, and the process of vetting and posting required more human resources, a web-based process [ERRATA_SYS_PROPOSAL] was created and launched in November 2007.¶

Another reason for the current, web-based approach to handling erratum reports is that about half the reports are not simply editorial, but rather apply to the technical contents of RFCs. A savvy implementer of the specification can often, but not always, determine what was intended by the RFC as published, but technical errors should be announced somehow. Furthermore, the posting of technical errata for Standards Track documents should always involve the IESG, as a matter of correct process. Technical errata may require much review and discussion among the author(s), Area Directors, and other interested parties. (See [HOW_TO_REPORT] for guidelines regarding editorial vs. technical classification.)¶

We note that allowing technical errata is a slippery slope: there may be a temptation to use errata to "fix" protocol design errors, rather than to publish new RFCs that update the erroneous documents. In general, an erratum is intended to report an error in a document, rather than an error in the design of the protocol or other entity defined in the document, but this distinction may be too imprecise to avoid hard choices. For the IETF Stream, these choices are made by the IESG and are discussed in their guidelines on errata processing [IESG-Err-Proc].¶

2.1. Reporting Errata

A member of the Internet community (the "reporter") navigates to the RFC errata page [ERRATA_PAGE], enters the RFC number of the document containing the error, and clicks the Search button. All earlier erratum reports for that RFC are displayed. This includes reports of any status (Verified, Reported, Held for Document Update, and Rejected). The reporter is asked to check that the erratum does not already appear on the errata page for any given RFC. This step is to prevent multiple reports of the same error.¶

The reporter then reports the erratum using a Web form to create a report record in the RFC errata database. The report is composed of information provided by the reporter and is supplemented by data drawn from the primary rfc-editor.org database. The erratum report record includes the following fields:¶

The following information is requested from the reporter. All fields must be filled in:¶

• Reporter name¶

• Reporter email address (Note that the address is provided for communication purposes with the relevant SSPs and authors, but it is not displayed in the online erratum report.)¶

• Publication format: Text, PDF, HTML (This field is present for only RFC 8650 and higher.)¶

• Type: editorial, technical¶

• Section #¶

• Original text¶

• Corrected text¶

• Notes¶

The reporter is asked to make a judgment on the erratum type -- technical vs. editorial. If the reporter has both editorial and technical errors in the same RFC, the two classes of errata must be entered as separate reports. This initial classification is useful to the SSP; for example, it might allow technical errata to be processed with higher priority than editorial errata, and it allows the RPC to verify editorial erratum reports and to note frequent editorial errors that could possibly lead to improvements in the editorial process.¶

With the aid of published guidelines (see [HOW_TO_REPORT]), the reporter should make the right technical/editorial classification. However, if the reporter does misclassify the report, the SSP can fix the classification when logged in as a verifier.¶

The reporter should enter a new erratum using the Original and Corrected Text fields, as this allows for easier verification. The reporter can use the free-text Notes field to provide the rationale or to describe those errata that cannot easily be put into the Original/Corrected format.¶

When the reporter submits the report, they are shown a preview of it. They can choose to edit the report, cancel, or submit. They must successfully navigate a reCAPTCHA in order to complete the report submission.¶

The information provided by the reporter is supplemented by information pulled from the database:¶

• Errata ID number¶

• RFC title and associated draft string (if available)¶

• Publication Date¶

• Author(s)¶

• Category ("status") of RFC¶

• Source (Working Group Name, IAB, IRTF, INDEPENDENT, or Editorial)¶

• Area (for IETF Stream)¶

• Stream (IETF, IAB, IRTF, INDEPENDENT, or Editorial)¶

• Verifying Party (SSP Identity)¶

• URL to the distinct erratum report¶

When a report is successfully submitted, a notification is sent via email (see Section 2.2), and the report is posted to the rfc-editor.org website (see Section 2.3).¶

2.2. Initial Notification Message

Submitting the report triggers an email notification message to multiple parties; see the notification lists below. Including multiple parties facilitates cooperation in verifying the error and transparency in the process.¶

Notifications are determined by stream and type of erratum report and are sent by rfc-editor@rfc-editor.org to the following SSPs.¶

Note that while SSP email addresses are maintained by the database, author email addresses, especially for older RFCs, are often out of date. In these cases, the SSP has the option of seeking current author contact information or relying on other individuals with knowledge of the subject matter to help determine the validity of the erratum report.¶

2.3. Posting Erratum Reports

As soon as an erratum is submitted, it is available online as described below. The erratum entry is marked Reported until its state is updated by verifiers as described in Section 2.4. Duplicate and junk reports are available and marked as Reported only until they are deleted from the database by the RPC.¶

In this document, posting an erratum means that:¶

• The report can be discovered through the RFC errata search page: https://www.rfc-editor.org/errata.php.¶

• A link to the RFC's errata page appears on the following:¶

  • the results of the RFC search engine: https://www.rfc-editor.org/rfcsearch.html.¶

  • the RFC's info page. For example, see https://www.rfc-editor.org/info/rfc2119.¶

  • On the HTML format of the RFC. For example, https://www.rfc-editor.org/rfc/rfc2119.html.¶

All erratum reports for a single RFC, except for obvious spam reports, are posted in the following order:¶

• Verified Technical¶

• Verified Editorial¶

• Held for Document Update Technical¶

• Held for Document Update Editorial¶

• Rejected Technical¶

• Rejected Editorial¶

• Reported Technical¶

• Reported Editorial¶

All erratum reports are also available at https://www.rfc-editor.org/errata.json.¶

2.4. Verifying Erratum Reports

The initial notification message starts the verification process.¶

The RPC determines the validity of editorial erratum reports and also handles any junk or duplicate reports, whether they are labeled as editorial or technical.¶

Junk erratum reports contain bogus content in the Original text, Corrected text, and/or Notes fields. The RPC deletes such a report from the database and sends an email message to all recipients of the report notification, except for the reporter, notifying them that the report has been deleted.¶

If an erratum report duplicates an existing report, the RPC deletes the report and sends a reply-all to the notification message to say the report has been deleted.¶

The SSP and the authors are expected to determine the validity of any technical erratum report, by whatever procedure the SSP or the stream owner determines.¶

The RPC does not track the verification process for technical erratum reports. The SSP, not the author(s) or the RPC, has final responsibility for verifying or rejecting each technical erratum report. This helps to avoid a great deal of complexity and confusion.¶

Each SSP has a login account on the errata portal to edit and verify erratum reports. The SSP identity is added to the record and the individual is able to edit, verify, hold, or reject each erratum.¶

The Notes field allows reporters to submit information in any fashion they like, so there is a possibility of multiple errors being reported in this field. The SSP is able to split the report into multiple records to maintain one record per erratum report, as necessary.¶

Some erratum reports require significant email discussion between the reporter and the author(s) and/or SSPs (in particular, the IESG) before the final decision on a report can be made. The final outcome is captured in the erratum entry, and any controversy or explanatory material is recorded in the Notes field.¶

It sometimes happens that there are errata for errata, i.e., earlier postings must be altered. In this case, the RFC Editor can update the report as requested by an SSP or can grant an SSP temporary write access to the record to be updated.¶

Once verified, the erratum is available for viewing in the RFC's HTML format "inline" (for example, see https://www.rfc-editor.org/rfc/inline-errata/rfc3261.html) in addition to being on the RFC's errata page and discoverable through errata search functionality.¶

2.5. Erratum Report Announcements

Like the notification of submissions, the announcement of a verified (or held or rejected) erratum report varies by stream:¶

Notifications are determined by stream and type of erratum report.¶