Content Delivery Networks Interconnection W. Power Internet-Draft G. Goldstein Intended status: Standards Track Lumen Technologies Expires: 5 September 2024 A. Warshavsky Qwilt 4 March 2024 CDNI Metadata Expression Language draft-power-metadata-expression-language-01 Abstract This document specifies the syntax and provides usage examples for an expression language to be used within Streaming Video Technology Alliance (SVTA)/Content Delivery Network Interconnection (CDNI) Metadata Interface (MI) objects. The purpose of this expression language is to enable metadata to be applied conditionally (based on aspects of an HTTP request), and to enable Hypertext Transfer Protocol (HTTP) responses to be generated or altered dynamically. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 5 September 2024. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components Power, et al. Expires 5 September 2024 [Page 1] Internet-Draft CDNI Metadata Expression Language March 2024 extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Requirements . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Expression Usage In CDNI Metadata Model . . . . . . . . . . . 3 4. Expression Syntax BNF . . . . . . . . . . . . . . . . . . . . 3 5. Core Variables . . . . . . . . . . . . . . . . . . . . . . . 5 6. Operators And Keywords . . . . . . . . . . . . . . . . . . . 6 7. Built-In Functions . . . . . . . . . . . . . . . . . . . . . 8 7.1. Type Conversions . . . . . . . . . . . . . . . . . . . . 8 7.2. String Conversions . . . . . . . . . . . . . . . . . . . 9 7.3. Convenience Functions . . . . . . . . . . . . . . . . . . 9 8. User-Defined Variables . . . . . . . . . . . . . . . . . . . 11 8.1. MI.SetVariable . . . . . . . . . . . . . . . . . . . . . 12 9. Error Handling . . . . . . . . . . . . . . . . . . . . . . . 13 9.1. Compile-Time Errors . . . . . . . . . . . . . . . . . . . 13 9.2. Runtime Errors . . . . . . . . . . . . . . . . . . . . . 14 10. FCI Capabilities . . . . . . . . . . . . . . . . . . . . . . 14 10.1. FCI.SupportedMELFeatures . . . . . . . . . . . . . . . . 15 11. Informative Examples . . . . . . . . . . . . . . . . . . . . 16 11.1. MI.ComputedCacheKey . . . . . . . . . . . . . . . . . . 16 11.2. MI.ExpressionMatch . . . . . . . . . . . . . . . . . . . 17 11.3. MI.ResponseTransform . . . . . . . . . . . . . . . . . . 17 12. Security Considerations . . . . . . . . . . . . . . . . . . . 18 13. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 18 13.1. CDNI Payload Types . . . . . . . . . . . . . . . . . . . 18 14. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 19 15. Normative References . . . . . . . . . . . . . . . . . . . . 19 16. Informative References . . . . . . . . . . . . . . . . . . . 19 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 20 1. Introduction The CDNI metadata model defined in [RFC8006] allows metadata to be applied conditionally based on matches to an HTTP request hostname and/or path While this is sufficient for many use cases, the need often arises for configuration metadata (such as caching rules) to be applied conditionally based on matching values of HTTP request headers. Additionally, content delivery networks (CDNs) often need to conditionally modify responses before forwarding them to a client. These modifications typically involve adding, deleting, or modifying HTTP response headers or synthesizing responses. A set of CDNI metadata objects for conditionally applying metadata and modifying responses is defined in the Processing Stages Metadata Specification Power, et al. Expires 5 September 2024 [Page 2] Internet-Draft CDNI Metadata Expression Language March 2024 [SVTA2032], which requires an expression language to enable the specification of match expressions and synthetically generated values. This document specifies the syntax and provides usage examples for an expression language to be used within SVTA/CDNI Metadata Interface (MI) objects, such as those defined within CDNI Metadata Model Extensions [SVTA2029] and its subparts. 2. Requirements The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Expression Usage In CDNI Metadata Model The CDNI Metadata Expression Language (MEL) provides a syntax with a rich set of variables, operators, and built-in functions to facilitate two key use cases within the CDNI metadata model: * Match Expressions - Expressions that evaluate to a Boolean value are used to dynamically determine if metadata should be applied based on evaluation of aspects of an inbound HTTP request (matching to a header value, for example). * Value Expressions - Enable the dynamic construction of a value to be used in scenarios such as constructing a cache key, setting an HTTP response header or status code, rewriting a request Uniform Resource Identifier (URI), or dynamically generating a response body. Refer to the Processing Stages Metadata Specification [SVTA2032] for example usage of both match expressions and value expressions within the Processing Stages Model. Refer to the Cache Control Metadata Specification [SVTA2033] for example usage of Value Expressions to dynamically generate cache keys. 4. Expression Syntax BNF ::= "[" "]" | "[" "]" ::= | "," ::= "=" | | | | Power, et al. Expires 5 September 2024 [Page 3] Internet-Draft CDNI Metadata Expression Language March 2024 ::= "(" ")" | "(" ")" ::= | | | | | | | ::= "+" | "-" | "!" | "~" ::= NUMBER | STRING | "true" | "false" | "nil" ::= "and" | "or" ::= "+" | "-" | "*" | "/" | "%" ::= "|" | "&" | "~" | "<<" | ">>" ::= "." ::= "==" | "!=" | ">" | "<" | "<=" | ">=" ::= "regexmatch" | "~=" | "regexmatchi" | "!regexmatch" | "!regexmatchi" ::= "globmatch" | "*=" | "globmatchi" | "%*=" | "!globmatch" | "!*=" | "!globmatchi" | "!%*=" ::= "ipmatch" | "!ipmatch" ::= "integer" | "real" | "string" | "boolean" | "upper" | "lower" | "match" | "match_replace" | "add_query" | "add_query_multi" | "remove_query" | "remove_query_multi" | "path_element" | "path_elements" ::= | "_" ::= | ::= | "." | "-" | "_" | "#" ::= | Power, et al. Expires 5 September 2024 [Page 4] Internet-Draft CDNI Metadata Expression Language March 2024 ::= "a-z" | "A-Z" ::= "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" Figure 1 5. Core Variables The expression language supports two namespaces of core variables, each with a distinct prefix: * req. Prefix for accessing attributes of the HTTP request object * resp. Prefix for accessing attributes of the HTTP response object +=======================+================================+==========+ | Variable | Meaning | Type | +=======================+================================+==========+ | req.h. | Request header | String | +-----------------------+--------------------------------+----------+ | req.uri | Request URI (includes query | String | | | string and fragment | | | | identifier, if any) | | +-----------------------+--------------------------------+----------+ | req.uri.path | Request URI path | String | +-----------------------+--------------------------------+----------+ | req.uri.pathquery | Request path and query | String | | | string | | +-----------------------+--------------------------------+----------+ | req.uri.query | Request query string | String | +-----------------------+--------------------------------+----------+ | req.uri.query. | Request query string value | String | | | associated with . If | | | | the key is not present in | | | | the uri, nil is returned. | | | | If the key is present with | | | | no value, as in "a=", then | | | | an empty string is returned. | | +-----------------------+--------------------------------+----------+ | req.uri.querykv. | Request query string key and | String | | | value associated with , | | | | returned as a single String | | | | exactly as-is from the | | | | request url.For example, | | | | when used with a uri | | | | containing a query string | | | | "key=xxx", expression would | | Power, et al. Expires 5 September 2024 [Page 5] Internet-Draft CDNI Metadata Expression Language March 2024 | | return the string "key=xxx". | | | | When used with a uri | | | | containing a query string | | | | "key=", expression would | | | | return the string "key=". | | +-----------------------+--------------------------------+----------+ | req.method | Request HTTP method (GET, | String | | | POST, etc.) | | +-----------------------+--------------------------------+----------+ | req.scheme | Request scheme (http or | String | | | https) | | +-----------------------+--------------------------------+----------+ | req.clientip | IP address of the client | String | | | that made the request. | | | | Note: IPv6 addresses MUST | | | | NOT be enclosed in square | | | | brackets []. | | +-----------------------+--------------------------------+----------+ | req.clientport | Request port number | Unsigned | +-----------------------+--------------------------------+----------+ | resp.h. | Response header | String | +-----------------------+--------------------------------+----------+ | resp.status | Response status code | Unsigned | +-----------------------+--------------------------------+----------+ Table 1 6. Operators And Keywords +==========+==========+==========+================================+ | Operator | Type | Result | Meaning | | | | Type | | +==========+==========+==========+================================+ | == | infix | Boolean | Equality test | +----------+----------+----------+--------------------------------+ | != | infix | Boolean | Inequality test | +----------+----------+----------+--------------------------------+ | ! | infix | Boolean | Logical NOT operator | +----------+----------+----------+--------------------------------+ | > | infix | Boolean | Greater than test | +----------+----------+----------+--------------------------------+ | < | infix | Boolean | Less than test | +----------+----------+----------+--------------------------------+ | >= | infix | Boolean | Greater than or equal test | +----------+----------+----------+--------------------------------+ | <= | infix | Boolean | Less than or equal | +----------+----------+----------+--------------------------------+ | *= | infix | Boolean | Glob style match | Power, et al. Expires 5 September 2024 [Page 6] Internet-Draft CDNI Metadata Expression Language March 2024 +----------+----------+----------+--------------------------------+ | ~= | infix | Boolean | Regular expression match | | | | | (see [PCRE] for details on | | | | | PCRE RegEx matching) | +----------+----------+----------+--------------------------------+ | ipmatch | infix | Boolean | Match against IP address or | | | | | CIDR (IPv4 and IPv6). For an | | | | | example IP address of | | | | | '10.2.3.4', matching against | | | | | '10.2.3.0/24' would return | | | | | true, while matching against | | | | | '10.2.3.5' would return false. | +----------+----------+----------+--------------------------------+ | + | infix | Numeric | Addition | +----------+----------+----------+--------------------------------+ | - | infix | Numeric | Subtraction | +----------+----------+----------+--------------------------------+ | * | infix | Numeric | Multiplication | +----------+----------+----------+--------------------------------+ | / | infix | Numeric | Division | +----------+----------+----------+--------------------------------+ | % | infix | Unsigned | Modulus | | | | or | | | | | Integer | | +----------+----------+----------+--------------------------------+ | . | infix | String | Concatenation. Note: There | | | | | MUST be at least 1 space | | | | | before/after the dot operator. | +----------+----------+----------+--------------------------------+ | ? : | ternary | * | Conditional operator: ? | | | | | : Evaluates if | | | | | is true, otherwise. | +----------+----------+----------+--------------------------------+ | ( ) | grouping | | Used to override precedence | | | | | and used for function calls. | +----------+----------+----------+--------------------------------+ Table 2 Power, et al. Expires 5 September 2024 [Page 7] Internet-Draft CDNI Metadata Expression Language March 2024 +=========+=========================================+ | Keyword | Meaning | +=========+=========================================+ | and | Logical AND | +---------+-----------------------------------------+ | or | Logical OR | +---------+-----------------------------------------+ | not | Logical NOT (see also the "!" operator) | +---------+-----------------------------------------+ | nil | No value (distinct from empty value) | +---------+-----------------------------------------+ | true | Boolean constant: true | +---------+-----------------------------------------+ | false | Boolean constant: false | +---------+-----------------------------------------+ Table 3 7. Built-In Functions To enable the types of expressions typically used in content delivery scenarios to evaluate and generate or modify HTTP headers, the following set of built-in functions are defined to facilitate format conversions, matching, and query string management. Any dCDN that advertises support for a metadata property that leverages MEL MUST provide implementations of these built-in functions. 7.1. Type Conversions +============+=====================+=============+=========+ | Function | Action | Argument(s) | Returns | +============+=====================+=============+=========+ | integer(e) | Converts expression | 1 | integer | | | to integer. | | | +------------+---------------------+-------------+---------+ | real(e) | Converts expression | 1 | real | | | to real. | | | +------------+---------------------+-------------+---------+ | string(e) | Converts expression | 1 | string | | | to string. | | | +------------+---------------------+-------------+---------+ | boolean(e) | Converts expression | 1 | Boolean | | | to Boolean. | | | +------------+---------------------+-------------+---------+ Table 4 Power, et al. Expires 5 September 2024 [Page 8] Internet-Draft CDNI Metadata Expression Language March 2024 The following table summarizes the return values of type conversion functions when presented with edge-case input values: +============+===============+=======+==============+============+ | Function | non-zero | nil | non-numeric | numeric | | | numeric input | input | string input | zero input | +============+===============+=======+==============+============+ | integer(e) | integer | 0 | 0 | 0 | +------------+---------------+-------+--------------+------------+ | real(e) | real | 0 | 0 | 0 | +------------+---------------+-------+--------------+------------+ | string(e) | string | 'nil' | string | '0' | +------------+---------------+-------+--------------+------------+ | boolean(e) | true | false | true | false | +------------+---------------+-------+--------------+------------+ Table 5 7.2. String Conversions +==========+==============================+=============+=========+ | Function | Action | Argument(s) | Returns | +==========+==============================+=============+=========+ | upper(e) | Converts a string to | 1 | string | | | uppercase. Useful for case- | | | | | insensitive comparisons. | | | +----------+------------------------------+-------------+---------+ | lower(e) | Converts a string to | 1 | string | | | lowercase. Useful for case- | | | | | insensitive comparisons. | | | +----------+------------------------------+-------------+---------+ Table 6 7.3. Convenience Functions +===========================+=====================+======+=========+ | Function | Action | Args | Returns | +===========================+=====================+======+=========+ | match(string Input, | Regular expression | 2 | string | | string Match) | 'Match' is applied | | | | | to Input and the | | | | | matching element | | | | | (if any) is | | | | | returned. An empty | | | | | string is returned | | | | | if there is no | | | | | match.See | | | Power, et al. Expires 5 September 2024 [Page 9] Internet-Draft CDNI Metadata Expression Language March 2024 | | [PCRE] for details | | | | | on PCRE RegEx | | | | | matching. | | | +---------------------------+---------------------+------+---------+ | match_replace(string | Regular expression | 3 | string | | Input, string Match, | 'Match' is applied | | | | string Replace) | to the Input | | | | | argument and | | | | | replaced with the | | | | | Replace | | | | | argument upon | | | | | successful match. | | | | | It returns the | | | | | updated (replaced) | | | | | version of Input. | | | +---------------------------+---------------------+------+---------+ | add_query(string Input, | Add query string | 2 | string | | string q, string v) | element q with | | | | | value v to the | | | | | Input string. If v | | | | | is nil, just add | | | | | the query string | | | | | element q. The | | | | | query element q and | | | | | value v MUST | | | | | conform to the | | | | | format defined in | | | | | [RFC3986]. | | | +---------------------------+---------------------+------+---------+ | add_query_multi(string | Add all the query | 2 | string | | input, string qvs) | value elements from | | | | | qvs to the input | | | | | string. For | | | | | example, if qvs = | | | | | "k1=v1, k2=v2, | | | | | k3=v3"), parameters | | | | | k1, k2, k3 and | | | | | associated values | | | | | would be added to | | | | | input.If a | | | | | qvs element only | | | | | has a key but no | | | | | value, the existing | | | | | value of that key | | | | | will be kept. | | | +---------------------------+---------------------+------+---------+ | remove_query(string | Remove all | 2 | string | | Input, string q) | occurrences of | | | Power, et al. Expires 5 September 2024 [Page 10] Internet-Draft CDNI Metadata Expression Language March 2024 | | query string | | | | | element q from the | | | | | Input string. | | | +---------------------------+---------------------+------+---------+ | remove_query_multi(string | Remove all | 2 | string | | input, string qs) | occurrences of the | | | | | query string | | | | | elements referenced | | | | | in parameter qs | | | | | from the input | | | | | string. For | | | | | example, if qs= | | | | | "k1, k2, k3", all | | | | | occurrences of k1, | | | | | k2, k3 would be | | | | | removed from input. | | | +---------------------------+---------------------+------+---------+ | keep_query_multi(string | Remove all query | 2 | string | | input, string qs) | string elements | | | | | from input except | | | | | for the elements | | | | | referenced in | | | | | parameter qs. For | | | | | example, if qs = | | | | | "k1, k2, k3", all | | | | | query string | | | | | elements would be | | | | | removed from input | | | | | except for k1, k2, | | | | | k3. | | | +---------------------------+---------------------+------+---------+ | path_element(string | Return the path | 2 | string | | Input, integer n) | element n from | | | | | Input. -1 returns | | | | | the last element. | | | +---------------------------+---------------------+------+---------+ | path_elements(string | Return the path | 3 | string | | Input, integer n, integer | elements from | | | | m) | position n to m. | | | +---------------------------+---------------------+------+---------+ Table 7 8. User-Defined Variables In addition to the core variable namespaces that address HTTP request and response objects (req. and resp.), MEL supports user-defined variables that can be referenced via the following prefix: Power, et al. Expires 5 September 2024 [Page 11] Internet-Draft CDNI Metadata Expression Language March 2024 * var. Prefix for accessing user-defined variables set via MI.SetVariable A user defined variable is available for access in MEL expressions from the moment it is assigned, throughout the duration of the transaction. If a user variable is accessed before it has been set, it returns the value of nil. 8.1. MI.SetVariable MI.SetVariable is a GenericMetadata object that allows one to set user-defined variables that can be accessed from MEL. Variables set via this mechanism can be accessed in matching and value construction expressions using a var. prefix before the variable name. Note: Variable names MUST be string literals. Property: variable-name * Description: The name of the variable. * Type: String. Alphanumeric with both uppercase and lowercase characters; the property MUST start with a letter. * Mandatory-to-Specify: Yes Property: variable-value * Description: The string representation of the value to set for the user-defined variable. * Type: String, either the static value or a MEL expression, determined by the value-is-expression property. * Mandatory-to-Specify: Yes Property: value-is-expression * Description: A flag to signal whether the value is a static string literal or a MEL expression that needs to be dynamically evaluated. * Type: Boolean * Mandatory-to-Specify: No. The default is "False", indicating that the value is a string literal and does not need to be evaluated. Power, et al. Expires 5 September 2024 [Page 12] Internet-Draft CDNI Metadata Expression Language March 2024 The following example illustrates the setting of a user-defined variable whose value is a MEL expression suffixed by a static literal string: { "generic-metadata-type": "MI.SetVariable", "generic-metadata-value": { "variable-name": "myvar", "variable-value": "req.h.host . 'is my host from player'" "value-is-expression": true } } Figure 2 The following example illustrates the setting of a user-defined variable whose value is another user-defined variable suffixed by a static literal string: { "generic-metadata-type": "MI.SetVariable", "generic-metadata-value": { "variable-name": "myvar1", "variable-value": "req.host . 'is my host from player'" "value-is-expression": true } } { "generic-metadata-type": "MI.SetVariable", "generic-metadata-value": { "variable-name": "myvar2", "variable-value": "var.myvar1 . 'and forwarded to Origin'" "value-is-expression": true } } Figure 3 9. Error Handling 9.1. Compile-Time Errors To ensure reliable service, all CDNI metadata configurations MUST be validated for syntax errors before they are ingested into a dCDN. That is, existing configurations SHOULD be kept as the live running configuration until the new configuration has passed validation. If errors are detected in a new configuration, the configuration MUST be rejected. An HTTP 500 'Internal Server Error' SHOULD be returned Power, et al. Expires 5 September 2024 [Page 13] Internet-Draft CDNI Metadata Expression Language March 2024 with a message that indicates the source of the error (line number and configuration element that caused the error). Examples of MEL compile-time errors: * Unknown MEL variable name referenced in an expression * Unknown MEL operator, keyword, or functions referenced in an expression * Incorrect number of arguments used in a MEL expression operator or function * Incorrect type of argument used in a MEL expression operator or function 9.2. Runtime Errors If a runtime error is detected when processing a request, the request SHOULD be terminated, and an HTTP 500 'Internal Server Error' returned to the caller. To avoid security leaks, sensitive information MUST be removed from the error message before it is returned to an external client. In addition to returning the HTTP 500 error, the dCDN SHOULD log additional diagnostic information to assist in troubleshooting. Examples of runtime errors: * Failure to allocate memory (or other server resources) when evaluating a MEL expression * Incorrect runtime argument type in a MEL expression, such as, trying to convert a non-numeric string to a number 10. FCI Capabilities Since implementing the full MEL specification may be complex and onerous, a mechanism is needed for a dCDN to advertise what portions of the MEL standard it supports (if any). This section introduces the FCI.SupportedMELFeatures object, which can be contained within the Capabilities Advertisement object defined in [RFC8008] section 5, or embedded in an FCI.MetadataExtended object as defined in [SVTA2041], the SVTA Configuration Interface Metadata Capabilities Specification. Power, et al. Expires 5 September 2024 [Page 14] Internet-Draft CDNI Metadata Expression Language March 2024 If FCI.SupportedMELFeatures is provided within an Capabilities Advertisement object and a FCI.MetadataExtended object for a given footprint, the advertisement within FCI.MetadataExtended MUST take precedence. 10.1. FCI.SupportedMELFeatures The FCI.SupportedMELFeatures object is contained in FCI Capabilities advertisements and allows a dCDN to advertise the portions of the MEL specification that it supports. If a capabilities advertisement does not contain a FCI.SupportedMELFeatures or a FCI.MetadataExtended object with an embedded FCI.SupportedMELFeatures object, the upstream content delivery network (uCDN) MUST assume that the dCDN has support for the full MEL specification. Property: keywords * Description: A list of supported keywords. * Type: Array * Mandatory-to-Specify: No. If not specified, it is assumed to be empty. * Values: ["and", "or", "not", "nil", "true", "false"] Property: operators * Description: A list of supported operators. * Type: Array * Mandatory-to-Specify: No. If not specified, it is assumed to be empty. * Values: ["==", "!=", "!", ">", "<", ">=", "<=", "*=", "~=", "+", "-", "*", "/", "%", " . ", "()", "?:", "ipmatch"] Property: variables * Description: A list of supported variables. * Type: Array * Mandatory-to-Specify: No. If not specified, it is assumed to be empty. Power, et al. Expires 5 September 2024 [Page 15] Internet-Draft CDNI Metadata Expression Language March 2024 * Values: ["req.h.", "req.uri", "req.uri.path", "req.uri.pathquery", "req.uri.query", "req.uri.query.", "req.uri.querykv.", "req.method", "req.scheme", "resp.h.", "resp.status", "req.clientip", "req.clientport", "var." ] Property: built-in-functions * Description: A list of supported built-in function names. * Type: Array * Mandatory-to-Specify: No. If not specified, it is assumed to be empty * Values: ["integer", real", "string", "boolean", upper", "lower", "match", "match_replace", "add_query", "remove_query", "path_element", "path_elements", "add_query_multi", "remove_query_multi", "keep_query_multi"] The following example advertises a subset of MEL support: { "capabilities": [ { "capability-type": "FCI.SupportedMELFeatures", "capability-value": { "keywords": ["and", "or", "not", "nil", "true", "false"], "operators" : ["==", "!=", "!", ">", "<", ">=", "<=", "~=", " . ", "()" ], "variables": ["req.h.", "req.uri", "req.uri.path" ], "built-in-functions": [ "string", "boolean", "upper", "lower", "match", "match_replace", "path_element"] } } ] } Figure 4 11. Informative Examples 11.1. MI.ComputedCacheKey The following examples illustrate usage of the Metadata Expression Language to dynamically generate cache keys, as specified by the MI.ComputedCacheKey object in the Cache Control Metadata Specification [SVTA2033] Power, et al. Expires 5 September 2024 [Page 16] Internet-Draft CDNI Metadata Expression Language March 2024 Example setting the cache key to the value of the X-Cache-Key header from the client HTTP request: { "generic-metadata-type": "MI.ComputedCacheKey", "generic-metadata-value": { "expression": "req.h.x-cache-key" } } Figure 5 Example setting the cache key to the request URI, forced to lower- case: { "generic-metadata-type": "MI.ComputedCacheKey", "generic-metadata-value": { "expression": "lower(req.uri)" } } Figure 6 11.2. MI.ExpressionMatch The following example illustrates usage of the Metadata Expression Language to create a match expression, as specified by the Processing Stages Metadata Specification [SVTA2032] In this example, the expression is true if the user-agent (glob) matches '*Safari*' and the referrer equals 'www.x.com'. { "generic-metadata-type": "MI.MatchExpression", "generic-metadata-value": { "expression": "req.h.user-agent *= '*Safari*' and req.h.referer == 'www.x.com'" } } Figure 7 11.3. MI.ResponseTransform The following example illustrates usage of the Metadata Expression Language to alter the headers of an HTTP response, as specified by the Processing Stages Metadata Specification [SVTA2032] Power, et al. Expires 5 September 2024 [Page 17] Internet-Draft CDNI Metadata Expression Language March 2024 An HTTP response is transformed by adding a dynamically constructed header with a value that uses the expression language to concatenate the values of the user-agent and host header. { "generic-metadata-type": "MI.ResponseTransform", "generic-metadata-value": { "header-transform": { "add": [ { "name": "X-custom-response-header", "value": "req.h.user-agent . '-' . req.h.host", "value-is-expressions": true } ] } } } Figure 8 12. Security Considerations The FCI and MI objects defined in the present document are transferred via the interfaces defined in CDNI [RFC8006] which describes how to secure these interfaces protecting integrity and confidentiality while ensuring the authenticity of the dCDN and uCDN. 13. IANA Considerations 13.1. CDNI Payload Types This document requests the registration of the following entries under the "CDNI Payload Types" registry hosted by IANA: +--------------------------+---------------+ | Payload Type | Specification | +--------------------------+---------------+ | MI.SetVariable | RFCthis | +--------------------------+---------------+ | FCI.SupportedMELFeatures | RFCthis | +--------------------------+---------------+ Table 8: CDNI Payload Types Power, et al. Expires 5 September 2024 [Page 18] Internet-Draft CDNI Metadata Expression Language March 2024 14. Acknowledgements The authors would like to express their gratitude to the members of the Streaming Video Technology Alliance [SVTA] Open Caching Working Group for their guidance / contribution / reviews ...) Particulary the following people contribute in one or other way to the content of this draft: * Pankaj Chaudhari - Disney Streaming Services * Rajeev RK - picoNETS * Yoav Gressel - Qwilt * Alfonso Siloniz - Telefonica * Ben Rosenblum - Vecima 15. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [RFC8006] Niven-Jenkins, B., Murray, R., Caulfield, M., and K. Ma, "Content Delivery Network Interconnection (CDNI) Metadata", RFC 8006, DOI 10.17487/RFC8006, December 2016, . [RFC8008] Seedorf, J., Peterson, J., Previdi, S., van Brandenburg, R., and K. Ma, "Content Delivery Network Interconnection (CDNI) Request Routing: Footprint and Capabilities Semantics", RFC 8008, DOI 10.17487/RFC8008, December 2016, . 16. Informative References [PCRE] PCRE, "Perl Compatible Regular Expressions", . Power, et al. Expires 5 September 2024 [Page 19] Internet-Draft CDNI Metadata Expression Language March 2024 [SVTA] SVTA, "Streaming Video Technology Alliance Home Page", . [SVTA2029] SVTA, "CDNI Metadata Model Extensions", . [SVTA2032] SVTA, "Processing Stages Metadata Specification", . [SVTA2033] SVTA, "Cache Control Metadata", . [SVTA2041] SVTA, "Metadata Capabilities", . Authors' Addresses Will Power Lumen Technologies United States of America Email: wrpower@gmail.com Glenn Goldstein Lumen Technologies United States of America Email: glenng1215@gmail.com Arnon Warshavsky Qwilt Israel Email: arnon@qwilt.com Power, et al. Expires 5 September 2024 [Page 20]